Maraña New Gourd ● The Modern Yerba Mate Cup

Active DIY Electronics Projects

(found 16 projects)

Ends Tomorrow

Make 100 → USB to TTL micro shields

USB to TTL micro shield to integrate to your next micro-controller project.
Current

7%

Backers: 4
Funding: €72 of €999 (7% funded)
Average daily pledges: €4
Campaign Dates: January 8th -> January 29th (2020)
Time left: 1 days, 8 hours, 7 minutes

Ends after Friday

Synth.BT (modular synthesizer tools)

Good-looking passive synthesizer tools for your modular setup
Current

202%

Backers: 74
Funding: $5,463 of $2,700 (202% funded)
Average daily pledges: $210
Campaign Dates: January 2nd -> February 1st (2020)
Time left: 4 days, 7 hours, 18 minutes

3 axis gyroscope that act as potentiometer!

Replace any potentiometer with this motion control device in your project!
Current

189%

Backers: 23
Funding: $2,087 of $1,100 (189% funded)
Average daily pledges: $39
Campaign Dates: December 6th -> February 4th (2020)
Time left: 6 days, 21 hours, 2 minutes

Ends a week from now

ESPixel Clock

Make 100 Pixel Clocks
Current

255%

Backers: 30
Funding: $1,531 of $600 (255% funded)
Average daily pledges: $70
Campaign Dates: January 6th -> February 5th (2020)
Time left: 8 days, 14 hours, 13 minutes

RoboBoard: Programming by physical blocks.

Programmable board by blocks based on arduino.
Current

0%

Backers: 3
Funding: €3 of €25,000 (0% funded)
Average daily pledges: €0
Campaign Dates: December 23rd -> February 6th (2020)
Time left: 9 days, 13 hours, 0 minutes

Atto: An incredibly tiny, Arduino compatible board with USB!

This cost-effective, yet tiny USB dev. board is designed for makers. It can be soldered onto PCBs, used with a breadboard or by itself.
Current

118%

Backers: 351
Funding: £8,293 of £7,000 (118% funded)
Average daily pledges: £488
Campaign Dates: January 11th -> February 10th (2020)
Time left: 12 days, 20 hours, 7 minutes

Ends two weeks from now

Leviathan-Affordable Aquarium Automation

Monitor & control nearly every aspect of your aquarium using a tiny $14 circuit board! Part of the Make 100 initiative.
Current

626%

Backers: 100
Funding: $7,837 of $1,250 (626% funded)
Average daily pledges: $522
Campaign Dates: January 13th -> February 12th (2020)
Time left: 14 days, 22 hours, 57 minutes

500W Electricity generating solar power System

OGAR TECHNOLOGY 500W Electricity generating solar power/ DIY solar power generator / solar power system /solar energy system off-grid
Current

0%

Backers: 3
Funding: £3 of £210,500 (0% funded)
Average daily pledges: £0
Campaign Dates: December 16th -> February 14th (2020)
Time left: 17 days, 3 hours, 26 minutes

Ends more than three weeks from now

ARDIN - Industrial Arduino

DIN rail mounted Industrial Arduino
Current

12%

Backers: 10
Funding: €396 of €3,200 (12% funded)
Average daily pledges: €11
Campaign Dates: December 24th -> February 22nd (2020)
Time left: 24 days, 19 hours, 32 minutes

The Raspberry PI and Electronics Printed Circuit Board Ruler

A Raspberry PI reference ruler with frequently used pinouts, formulas, and schematic symbols.
Current

768%

Backers: 135
Funding: $1,537 of $200 (768% funded)
Average daily pledges: $307
Campaign Dates: January 23rd -> February 22nd (2020)
Time left: 25 days, 6 hours, 9 minutes

ioTouch, amazing design for your wireless projects.

ESP32 based developement board built on tempered glass TFT. Get in touch with your IOT projects..
Current

0%

Backers: 3
Funding: €147 of €40,000 (0% funded)
Average daily pledges: €37
Campaign Dates: January 24th -> February 23rd (2020)
Time left: 25 days, 20 hours, 57 minutes

Shine - Illuminating Skateboard Riser Pads - Make 100

Skateboard or Longboard Riser Pads: Low Profile Transparent Riser Pads - Illuminate day or night.
Current

0%

Backers: 3
Funding: $17 of $20,000 (0% funded)
Average daily pledges: $1
Campaign Dates: December 31st -> February 29th (2020)
Time left: 31 days, 16 hours, 9 minutes

Lifeclocc: Your life countdown and motivational companion

Make 100: A DIY desk clock to remind you about the importance of not wasting life.
Current

118%

Backers: 7
Funding: $237 of $200 (118% funded)
Average daily pledges: $0
Campaign Dates: January 28th -> February 29th (2020)
Time left: 32 days, 6 hours, 7 minutes

Breadboard Cards

Make it easier to correctly place an electrical component on a breadboard.
Current

11%

Backers: 13
Funding: $113 of $1,000 (11% funded)
Average daily pledges: $5
Campaign Dates: January 6th -> March 6th (2020)
Time left: 38 days, 2 hours, 28 minutes

Make 100: create your own Brain Computer Interface

Control devices with your brain
Current

31%

Backers: 21
Funding: €3,163 of €10,000 (31% funded)
Average daily pledges: €158
Campaign Dates: January 8th -> March 8th (2020)
Time left: 40 days, 1 hours, 58 minutes

< Previous 1 2 ... Next >

(total 16 results)

Performing maintenance. Some data may be briefly unavailable but is being collected and will be applied shortly.