Western Legends

Active DIY Electronics Projects

(found 9 projects)

Launched Today

Sensorless BLDC Motor Controller: Modular System

Sensorless BLDC motor controller, Modular System, Open source Hardware/Firmware, Texas Instruments microcontroller MSP430FR5949
Current

0%

Backers: 0
Funding: $0 of $2,195 (0% funded)
Average daily pledges: $0
Campaign Dates: January 20th -> February 19th (2018)
Time left: 29 days, 19 hours, 34 minutes

Gyroscope Sensor - Iota V2

Here is the evolution of my successful Gyroscope Sensor. Now smaller, lighter, cheaper and with optional PPM output.
Current

117%

Backers: 30
Funding: $1,177 of $1,000 (117% funded)
Average daily pledges: $589
Campaign Dates: January 19th -> March 20th (2018)
Time left: 59 days, 0 hours, 8 minutes

Launched before Sunday

ServoShock 2: Servo Control with the PS4 Controller

Control RC servos and digital outputs with a PlayStation 4 controller over USB or Bluetooth.
Current

50%

Backers: 30
Funding: $2,521 of $5,000 (50% funded)
Average daily pledges: $420
Campaign Dates: January 15th -> February 23rd (2018)
Time left: 34 days, 1 hours, 12 minutes

Launched more than a week ago

Quokka FPGA IoT Controller

Bringing FPGA, Robotics and IoT worlds together by creating easy to use boards and development toolkits
Current

1%

Backers: 5
Funding: $472 of $30,000 (1% funded)
Average daily pledges: $39
Campaign Dates: January 9th -> February 8th (2018)
Time left: 18 days, 14 hours, 26 minutes

EleksTube-A Time Machine

EleksTube is a full color Glow Tube Clock .
Current

160%

Backers: 92
Funding: $16,027 of $10,000 (160% funded)
Average daily pledges: $1,233
Campaign Dates: January 8th -> March 9th (2018)
Time left: 48 days, 6 hours, 34 minutes

JuiceBox Zero: Easiest way to power a Pi Zero with a battery

You have a Pi Zero project, but it's no good stuck to a wall! JuiceBox Zero is the simplest way to properly power your Pi Zero.
Current

92%

Backers: 67
Funding: $2,780 of $3,000 (92% funded)
Average daily pledges: $214
Campaign Dates: January 8th -> February 6th (2018)
Time left: 17 days, 6 hours, 12 minutes

Isolated USB to UART Converter for Arduino pro mini

Simple, tiny USB to UART converter with digital isolator working between 2.5V and 5V up to 3Mboud, with the Arduino Pro mini connector.
Current

209%

Backers: 60
Funding: €1,046 of €500 (209% funded)
Average daily pledges: €58
Campaign Dates: January 3rd -> February 2nd (2018)
Time left: 13 days, 3 hours, 54 minutes

OmniJoy

A multipurpose Raspberry Pi powered robot controller and gamepad.
Current

13%

Backers: 6
Funding: $1,355 of $10,000 (13% funded)
Average daily pledges: $75
Campaign Dates: January 3rd -> February 2nd (2018)
Time left: 12 days, 20 hours, 59 minutes

DuinoKit Tiny - ATTiny85 Arduino Discovery Learning Kit

Easy and fun kit to learn about wiring and programming the ATTiny85 chip in a plug-and-play Arduino based environment.
Current

83%

Backers: 59
Funding: $4,932 of $5,900 (83% funded)
Average daily pledges: $154
Campaign Dates: December 20th -> February 3rd (2018)
Time left: 14 days, 7 hours, 41 minutes

< Previous 1 Next >

(total 9 results)