AUNO: 100% Raw Superfood Cereal On-The-Go

Active DIY Electronics Projects

(found 19 projects)

Ends Tomorrow

RetroSound: give that nokiasound a 2nd life in your projects

RetroSound is a small module with dutch roots. It gives an easy ability of using those old school sounds in your present projects.
Current

56%

Backers: 25
Funding: €370 of €650 (56% funded)
Average daily pledges: €12
Campaign Dates: June 18th -> July 20th (2018)
Time left: 1 days, 16 hours, 23 minutes

Ends after Sunday

Merlin Boards

Powerful and long distance range remote controlled custom electric skateboards.
Current

26%

Backers: 4
Funding: $2,621 of $10,000 (26% funded)
Average daily pledges: $49
Campaign Dates: May 26th -> July 25th (2018)
Time left: 6 days, 10 hours, 21 minutes

Ends a week from now

The Brack-let

The Brack-let has a built-in power cord.It's used to mount speaker on a wall that require power. wireless speaker like SONOS,Bose,JBL
Current

0%

Backers: 4
Funding: $31 of $7,046 (0% funded)
Average daily pledges: $1
Campaign Dates: June 28th -> July 28th (2018)
Time left: 9 days, 10 hours, 35 minutes

I2C Encoder V2

I2C Encoder V2 is a tiny smart board for connecting multiple rotary encoders on the I2C bus.
Current

839%

Backers: 184
Funding: €8,398 of €1,000 (839% funded)
Average daily pledges: €382
Campaign Dates: June 27th -> July 28th (2018)
Time left: 9 days, 11 hours, 54 minutes

UDOO BOLT: Raising the maker world to the next level

Almost twice as fast as the MacBook Pro 13", for VR, AR, and AI projects. The first Maker PC with the AMD Ryzen™ Embedded V1000
Current

576%

Backers: 1317
Funding: $576,906 of $100,000 (576% funded)
Average daily pledges: $11,774
Campaign Dates: May 31st -> July 30th (2018)
Time left: 11 days, 5 hours, 23 minutes

Sunflower Shield - 3.5” HMI Display w/ Cap Touch for Arduino

The Sunflower Shield allows makers to add a 3.5" (QVGA) TFT LCD Display with capacitive touch to their Arduino projects.
Current

215%

Backers: 59
Funding: $5,391 of $2,500 (215% funded)
Average daily pledges: $300
Campaign Dates: July 1st -> July 31st (2018)
Time left: 12 days, 2 hours, 11 minutes

Kraztech Real Time Clock Module and Arduino Library

A full-featured Real Time Clock module for Arduino enthusiasts. Fully functional with a ready to go Arduino library.
Current

63%

Backers: 36
Funding: $945 of $1,500 (63% funded)
Average daily pledges: $59
Campaign Dates: July 3rd -> August 2nd (2018)
Time left: 14 days, 2 hours, 55 minutes

NanoRanger from AltoNovus; High Accuracy, Low Current Meter.

An accurate, factory calibrated, 3.5 Digit, Auto-Ranging, DC ammeter. It reads from 800mA to 1nA, for professionals and enthusiasts.
Current

4%

Backers: 14
Funding: £1,111 of £25,000 (4% funded)
Average daily pledges: £36
Campaign Dates: June 18th -> August 2nd (2018)
Time left: 14 days, 2 hours, 58 minutes

Ends two weeks from now

Off the Grid "PI" Routers. Mesh Capable & IoT ready

This is an internet in a can concept. Using a couple or more of this routers you will be able to setup your outdoor community network.
Current

10%

Backers: 5
Funding: $266 of $2,500 (10% funded)
Average daily pledges: $13
Campaign Dates: June 28th -> August 7th (2018)
Time left: 19 days, 15 hours, 17 minutes

Ends more than three weeks from now

DeDe - DEbug & DEvelopment Shield for Arduinos & Compatibles

The shield of shields! DeDe lets you see what your Arduino UNO or nearly ANY board with a compatible footprint is doing at a glance!
Current

41%

Backers: 133
Funding: $5,779 of $14,000 (41% funded)
Average daily pledges: $578
Campaign Dates: July 9th -> August 10th (2018)
Time left: 22 days, 15 hours, 10 minutes

The Oscilloscope Clock VII, higher voltages for larger CRTs

The Oscilloscope Clock VII is able to drive larger 5" CRTs and generates higher voltages for many other CRT types and is also a DIY kit
Current

320%

Backers: 9
Funding: $1,600 of $500 (320% funded)
Average daily pledges: $229
Campaign Dates: July 12th -> August 11th (2018)
Time left: 23 days, 12 hours, 44 minutes

tuBoard: Supports your Project Automatically

tuBoard is a revolutionary DevBoard based on Arduino for Robotics and Electronics. It has pair of µControllers like right & left Brains
Current

5%

Backers: 10
Funding: $653 of $12,000 (5% funded)
Average daily pledges: $109
Campaign Dates: July 13th -> August 12th (2018)
Time left: 23 days, 19 hours, 52 minutes

Affordable Electric High Speed Motorcycle

An Affordable Electric Motorcycle thats around $5000 to build, and comparable in performance to gas equivalent motorcycles.
Current

0%

Backers: 0
Funding: $0 of $5,000 (0% funded)
Average daily pledges: $0
Campaign Dates: July 18th -> August 17th (2018)
Time left: 29 days, 13 hours, 58 minutes

Battery Just In Case

Battery Just In Case is a very unique all-in-one USB and Solar charger case that is used to charge cell phones and other devices.
Current

0%

Backers: 3
Funding: $61 of $50,000 (0% funded)
Average daily pledges: $31
Campaign Dates: July 17th -> August 21st (2018)
Time left: 33 days, 6 hours, 55 minutes

CortexProg

Best value in Cortex-M programming & debugging: ZeroWireTrace, Gang-loading, MultiCore chip support, LUA-scripted, Chip-Support plugins
Current

9%

Backers: 57
Funding: $2,093 of $22,000 (9% funded)
Average daily pledges: $91
Campaign Dates: June 26th -> August 25th (2018)
Time left: 37 days, 11 hours, 0 minutes

< Previous 1 2 ... Next >

(total 19 results)