OpenLOCK Industrial Platforms, 28mm Tabletop Game Terrain
A project in Charlotte, NC by Chris Martens000days
:
00hours
:
00minutes
Funding Successful
This is a set of STL files based on the OpenLOCK connection system that will allow you to print out 28mm industrial platform terrain.
Backers: 56
Average Pledge Per Backer: $33
Funded: $1,853 of $500
Dates: Sep 27th -> Oct 24th (28 days)
Project By: Chris Martens
Backers: 56
Average Pledge Per Backer: $33
Funded: $1,853 of $500
Dates: Sep 27th -> Oct 24th (28 days)
Project By: Chris Martens
$1,853
current pledge level
Last Updated: October 24 @ 19:18 -0400 GMT
370%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
STRETCH GOAL UNLOCKED!!! 
October 23rd - via: kickstarter.com
With 32 hours remaining we just crossed the $1500 stretch goal unlocking the "Railings and Half Walls" STL files! Can we reach the $2000 Stretch Goal: Edge Pillars? Get the word out and help unlock more for everyone! (Read More)
Discount Code Update
October 19th - via: kickstarter.com
Hey everyone! I wanted to give an update to my last update concerning the discount code to purchase the stretch goals that were unlocked. Some of you have expressed your wish to purchase these but doubt you could this month. I realize times are hard... (Read More)
The Final Days!
October 18th - via: kickstarter.com
Hey Everyone! We are less than a week from the end of this campaign and I want to say thank you to all of you that has gotten this project this far. I do expect a rush of supporters as usual at the end of all my previous campaigns. If we do not... (Read More)
$2500 Stretch Goal: Edge Pillar Tiles with Walls
October 10th - via: kickstarter.com
You will get 30 STL files of the Edge Tiles with Walls combined with the Edge Pillar and the Edge Pillar Top Cap. (Read More)
$2000 Stretch Goal: Edge Pillars Design Work is DONE!
October 9th - via: kickstarter.com
For this stretch goal you will be getting 49 STL files of various Edge Pillars. These will let you support the platforms from the edges and not the center. This will give you much more open levels. There are 4 different edge tiles for each tile type... (Read More)
$1500 Stretch Goal: Railings and Half Walls (Official Announcement)
October 8th - via: kickstarter.com
This stretch goal contains a whopping 123 STL files for walls and bridges with railings! Each tile type (grate and diamond plate) have two types of hall walls (light and heavy cover) for all three edge types (square, triangle, and round). And the... (Read More)
The Design Work for the $1500 Stretch Goal is Complete!
October 7th - via: kickstarter.com
I thought the rounded tile half walls and railings would take a little longer but I just finished them. This means all the STL files for the $1500 stretch goal are now complete!!! Another 24 files to the batch. Hope everyone likes. (Read More)
More Design Work Done for the $1500 Stretch Goal
October 7th - via: kickstarter.com
Just finished up all the railings and half walls for the triangle edge tiles for both the grate and diamond plate versions. That's about another 40 STL files added. Next is the Rounded Edge Tiles. Hope to have them done tomorrow!! (Read More)
End of Day Report for 10/5/21
October 5th - via: kickstarter.com
As I begin to wind down for the night here is where we stand: All the design work for the square tile half walls and railings are done for both grate and diamond plate tiles. I am more than a quarter but not quite half way thru the design work for... (Read More)
The $1500 Stretch Goal Designs are in the Works!
October 5th - via: kickstarter.com
I have the first part of the $1500 stretch goal design work done. The Railings and half ways for the square grate floor tile edges are done and here they are. The triangle and rounded edges are up next then the Diamond Plate versions. All for the... (Read More)
Design Work Resumes!
October 4th - via: kickstarter.com
Thank you for your patience. I am now home and the design work will resume later today and tomorrow. I hope to have some examples up soon. I hope everyone had a great weekend! ~Chris (Read More)
Thank you, everyone!
October 1st - via: kickstarter.com
Hey everyone! Wanted to give an update an apologize for how quiet I've been. Thank you for the support and funding my latest project. I've been quiet the past few days cause I went out of town to see family on short notice. I cannot work on much,... (Read More)
If you have additional news that doesn't appear here, shoot us a link!