VibroTab — DIY Vibrating Table Kit for Makers

A project in Los Angeles, CA by Maksim Kravchenko
000days 
:
00hours 
:
00minutes 

Funding Successful

A simple and affordable kit for those who work with concrete (and not only) molds.
DIY
Backers: 42
Average Pledge Per Backer: $44

Funded: $1,828 of $1,500
Dates: May 10th -> Jun 16th (37 days)
Project By: Maksim Kravchenko
Tags:
Aw shucks, no tags yet. +Suggest

Suggest Tags

Begin typing to search or pick from a list. You can add multiple tags at the same time!
SubmitCancel

What is tagging? || Have a new tag we should add?
Saving your suggestions...
Suggestion Saved Successfully
Thank you for your help! The Kicktraq gnomes will get to work on your suggestions very soon.

Please keep in mind not all suggestions may be used, and repeated re-submissions may result in being rejected automatically (and we don't want that to happen).

If you have any questions, have a good idea for a tag, or a more in-depth suggestion - please feel free to let us know!

Ok
Hrm... something went wrong.
Hey, bad things happen to the best of us. Don't worry, the gnomes have been dispatched. Maybe try again in a little while.

Ok

$1,828

current pledge level
Last Updated: June 16 @ 15:09 -0400 GMT

121%

of goal
funding period ended

$0

trending toward
Trends are not projections. Read More >>

0%

of goal

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

Now you can share!

Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.

Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.

HTML for websites & blogs
Copy HTML

BBCode for forums
Copy BBCode

Reddit code for... well, Reddit
Copy Reddit Code

Special Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.

You can read more about it here.
Latest News

Final details and manual design

June 15th - via: kickstarter.com
Hi all. Thank you very much for supporting this project. As the final date is approaching so is the work on the project.  In these final days some small corrections to the model were made based on the experience of using the prototype resulting in... (Read More)

First assembly and vibrations

June 4th - via: kickstarter.com
Assembly and vibration testsFinally most of the parts were 3D printed, OSB board purchased and first assembly took place! Vibration was tested and results are very satisfying. The top working surface under a 20 lb load was vibrating smoothly,... (Read More)

Update! GUI screens and further actions

May 27th - via: kickstarter.com
Greetings dear supporters and bystanders! I would like to give some update on the progress of the project.  These past several weeks I was extremely busy at my primary job and had to fly to Iowa City to assist a customer with their particle... (Read More)

If you have additional news that doesn't appear here, shoot us a link!