Industrial Underhive 3D Terrain - Complete project
A project in Merksem, Belgium by BlackSheepScenery - Michiels Tim000days
:
00hours
:
00minutes
Funding Successful
A 28mm modular, no glue recuired, complete Industrial tabletop terrain set. Created for grimdark, sci-fi tabletop games. As Necromunda.
Backers: 43
Average Pledge Per Backer: €38
Funded: €1,628 of €234
Dates: Feb 10th -> Mar 6th (24 days)
Project By: BlackSheepScenery - Michiels Tim
Backers: 43
Average Pledge Per Backer: €38
Funded: €1,628 of €234
Dates: Feb 10th -> Mar 6th (24 days)
Project By: BlackSheepScenery - Michiels Tim
€1,628
current pledge level
Last Updated: March 6 @ 02:16 -0500 GMT
695%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
Added 2 pieces to the basic set 
March 2nd - via: kickstarter.com
So I mAde and added an L beam and a L walk way, with 1 long side. The picture only shows the L beam. The other piece Is the long walk way, wish I added yesterday. (Read More)
What do you think I could do better or improve?
March 2nd - via: kickstarter.com
Hi, I honestly like your opinion how I can improve my kickstarter project. Not forgetting me being an amateur, with no start capital. So proffecional fotos, painting and prints such is not something I can do. I'm not complaining about the amount that... (Read More)
Seems like I'll be adding some more
March 2nd - via: kickstarter.com
As I am building a shelf diorama, it seens I could use some more structural pieces, to strenghten large overhangs. (Read More)
Custom gang TAG
March 1st - via: kickstarter.com
For the case the 'gang TAG' thingy wasnt very accurate discribed by my: I mAde my TAG on this wall, a's you can see. So the TAG is more lIke a graffiti thingy. (Read More)
Added 2 pieces to basic
March 1st - via: kickstarter.com
So while I was making parcours, I found it usefull to make extended walkways. These you can use to overhang a full tile. Also printed these (Read More)
Damaged files painted
March 1st - via: kickstarter.com
Thought I share a picture oF some speed painted damaged files. Dont mind the bad painting, just wantenne do show some detailed damage. Still nEed to paint these tho (Read More)
Next kickstarter
March 1st - via: kickstarter.com
I promised all my bAckers as a free reward, my next kickstarter project. A modular display box, wish is an expansion oF the current project. For personal use only. The commercial liscence wil become available on the next kickstarter. So this is what... (Read More)
Free Gang Tag
February 28th - via: kickstarter.com
All backers get a wall with a free personalized gang TAG, slogan or any text by choise. Just leave it here in the comments section or true message if you want one. (Read More)
Building guide
February 27th - via: kickstarter.com
I was making this for my next project but thought it might help to post it here aswell. Compared for what I used for this project, this might be a bit more handy. I'm making some progress. :p these are all the parts needed for a ground floor display... (Read More)
Prints
February 27th - via: kickstarter.com
Printed some files: Tile raiser: A overhang gate Some 2 damaged pieces (Read More)
Custom gang TAG
February 26th - via: kickstarter.com
I had this crazy idea to customize a wall with a gang TAG or a sketch oF a logo by choice, as an extra reward for this campaing for 1euro. Anyone has a gang TAG or sign I can use as an example? (Read More)
download links
February 25th - via: kickstarter.com
So I updated the links to download your rewards. Every Industrial underhive reward has a 3MF file, with all the files + all the STL files. The add-on Necro city 1.0 has a zip file with all the 200+ STL's and the 2.0 damaged version has only the 3MF... (Read More)
Additional pieces
February 25th - via: kickstarter.com
A part oF that this piece needs to be glue'd, I thought it could be a cosmetic upgrade for free standing collum towers. I also mAde this support tube overhang (that was printed at 300mm/s and 1 beam broke during print, with a print time of... (Read More)
More info about the addons
February 24th - via: kickstarter.com
Due my lack oF experiece oF this being my first kickstarter. I seem to forgot some usefull information about the addons. More info and all the pieces oF hIve city 1.0 you can find here:... (Read More)
Correction full board update
February 24th - via: kickstarter.com
Seems that my memory Failed me yesterday (Read More)
Modular display box
February 24th - via: kickstarter.com
WIP of my modular display box system, wish will be released on kickstarter in a couple of days for only 1Dollar per set-up. Wish will be included free to all my current Backers as a special tHank you Picture 1&2 are for 28mm bases gangs &... (Read More)
Full build plate at 80mm/s
February 23rd - via: kickstarter.com
First time I'm thought about sharing my full build plates. So this is an example oF my current. 12 different long Walls and 2 L beams, printed at 80mm/s on 0,24mm takes me around 24hours to finish. A full build plate with 25 pillars was around... (Read More)
Ramps, ladder & stairs
February 23rd - via: kickstarter.com
So I mAde a small and wide ramp. Printed them on 0.24 but should be printed less for a smoother surface on the sIdes. Also streched a stair and mAde a 2level high ladder. (Read More)
Current Pieces for each:
February 22nd - via: kickstarter.com
A small update on the number of pieces / STL files per reward: Basic terrain set: 100 files (4 files I can't repare, but already printed them more then once) Damaged version: 45 files (1 file I can't repare, but already printed them more then once)... (Read More)
Wall with bulk door & full floortile
February 22nd - via: kickstarter.com
So I managed to make a bulkdoor that fits in the wall . Sadly not that impressive, but it fits. And mAde 2 different full floortiles. This is one of them. (Read More)
additional pieces for the basic edition
February 21st - via: kickstarter.com
so I made a bulk door, a 2 lvl ladder, small and big ramp, a full pillar and collum tile and some 'rectangel' tiles (Read More)
Printer issues
February 21st - via: kickstarter.com
I wanted to show you some printed damaged files, now that I have a new printer. But seems I have to deal with the same problem as before. Printing of the first piece, a damaged Half tile, went well. And the second came out lIke this: No clue what... (Read More)
printing time and material cost screanshots.
February 21st - via: kickstarter.com
I made some screanshots of the printing time and material cost of my default settings. 200mm/s of my ender3 v3 printer (Read More)
Open for Sugestions
February 19th - via: kickstarter.com
I tried to include / design as much modular pieces as I could for making your own Industrial underhive. In the future I might release some more on my cults3D profile. But if you have any sugestions for pieces that could be usefull for your hIve,... (Read More)
As a special thanks
February 19th - via: kickstarter.com
Tomorrow my new invested printer should arrive, so hopefully I will be able to share most oF the damaged edition files, printed out,this weekend. Because my current printers don't have anything to show beside: As a special thanks I will reward all my... (Read More)
Background pieces diorama
February 18th - via: kickstarter.com
A little progress: It stil needs some drybrushing, extra paint, railngs and stairs. (Read More)
Just wanted to say thank you
February 17th - via: kickstarter.com
I just wanted to say thank you, to all my current backers. You have givin me a chance to grow and the motivation to keep going. At this point I have anouph for me to invest in a descent printer and to buy me a subscription for a 3D designing... (Read More)
Damaged version
February 16th - via: kickstarter.com
This collum was printed a bit better, then the first one. Also a damaged walk way, beam and short beam My main problem, starts with printing larger flat pieces . Then my extrudor begins to click, untill it clogs or snap. So still can't show any... (Read More)
Overhang beams
February 16th - via: kickstarter.com
Made a set oF 3 different lengts Wish can easely be clicked at the bodem oF floortiles, beams, walkways and platforms. They will be added to the basic pack (Read More)
Added railing corner
February 16th - via: kickstarter.com
Made a corner piece for the railings. To fill in the open space where there is no pillar (Read More)
Modified pillar and collum connector
February 16th - via: kickstarter.com
I made them quick and easy to print, but by doing so, it lost the abillity to push&click. But I made them just anouph to keep in place. (Read More)
Added 2to1 pillar connectors
February 16th - via: kickstarter.com
To gain as much modularity as I can,I made connectors wish can connect two to one pillar. They will be added to the basic pack (Read More)
Background pieces in use
February 15th - via: kickstarter.com
So I mAde a small example, with thebackgroun prints that were available. The red coloured pieces are from the basic set. (Read More)
damaged version
February 15th - via: kickstarter.com
Seems I had forgotten the collum floortiles the last time. So Here a quick peek. (Read More)
Background pieces
February 13th - via: kickstarter.com
So these are almost all the background pieces, only the necro city pillar is missing. These pieces do need glue. But they safe print time and material, wish is normaly wasted, when you use them as a background or when you raise your tiles or floor... (Read More)
Damaged printed pieces
February 13th - via: kickstarter.com
Here you see a damaged, broken and destroyed pillar and a falled print oF a damaged collum. Got the pillars in full and hollow. The faulth is not in the print itself. Got this problem more then I can handle. But every now and then, they do work. (Read More)
A little update about the damaged version
February 13th - via: kickstarter.com
So this are some pictures of the progress I made: Have'nd printed them yet tho. There currently both offline, but when I do I'll keep you guys updated. A little downside: all my floortiles, beams, walkways and platforms are printed upside down, so... (Read More)
I sorted and grouped all the rewards, in seperated 3MF files
February 10th - via: kickstarter.com
I grouped all the files and sorted them per reward each in a seperated 3MF file. So you get a good idea of all the pieces and as you can see all repared. the following screanshot were some pieces that i forgot, there incl in the basic pack: so I only... (Read More)
If you have additional news that doesn't appear here, shoot us a link!