3D Printed Educational Robotic Platform
A project in by Socially Shaped000days
:
00hours
:
00minutes
Funding Successful
Build your own customized balancing robot and gain first hand experience in Programming, Robotics, and 3D Design.
Backers: 89
Average Pledge Per Backer: $296
Funded: $26,366 of $25,000
Dates: May 20th -> Jun 19th (30 days)
Project By: Socially Shaped
Backers: 89
Average Pledge Per Backer: $296
Funded: $26,366 of $25,000
Dates: May 20th -> Jun 19th (30 days)
Project By: Socially Shaped
$26,366
current pledge level
Last Updated: June 19 @ 14:02 -0400 GMT
105%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
Wow what a week....We MADE IT!!!! Thanks for All Your Support!
June 16th - via: kickstarter.com
Wow what a week....We MADE IT!!!! Thanks for All Your Support! First we were at MakerFaire helped by the wonderful people at Infosys Foundation and the Carnegie Mellon's Create Labs. Now with over 30 new backers this week we are over our goal!... (Read More)
Only four days left! At 68% funded we're much closer to our goal...
June 5th - via: kickstarter.com
Hello again to all our backers! First, thanks to all of you for helping us get this far. We only have four days left and still need to raise $7958 dollars to successfully fund. The word is spreading, the excitement is growing and we continue to work... (Read More)
Thank you backers! We reached $10,000!
May 30th - via: kickstarter.com
Thank you backers! We reached $10,000! The whole SociallyShaped team is so honored by your support. Share our link with everyone you know so we can make the Roby platform a reality: http://kck.st/1KkgSKv Together we can do it!! Special Note:... (Read More)
New Shipping and Rewards!
May 27th - via: kickstarter.com
We at SociallyShaped cannot believe the wonderful outreach we are getting. As a reward to the community; After a lot of hard work by the staff to get the proper paperwork and vendors in place, we are now offering new shipments to Singapore, Hong... (Read More)
Roby, the 3D printable robot hits Kickstarter to teach kids programming, 3D design & robotics
May 22nd - via: 3ders.org
The Roby educational robot kit has been specifically designed to help people of all ages to get to grips with programming, 3D design and the world of robotics. (Read More)
3D Printed Robot, Roby, Hits Kickstarter to Teach Programming & Robotics to Kids
May 21st - via: 3dprint.com
John Villwock and Mikhail Stolpner met at Cornell University, and while they were there, the pair say their introduction to the cutting edge of research and development got them excited about bringing technology to the maker community. (Read More)
Amazing! 27% of our goal in just 4 days! Thank You Kickstarter Community!
May 20th - via: kickstarter.com
Wow, What an amazing few days! The SociallyShaped team is truly honored by the response Not only have we reached 27% in just 4 days, the campaign has also been picked up by tons of media outlets! Most of the team has been away in NYC and... (Read More)
If you have additional news that doesn't appear here, shoot us a link!