Nixie Tube Calculator

A project in Eugene, OR by scott baker
000days 
:
00hours 
:
00minutes 

Funding Unsuccessful

Raspberry Pi powered Nixie Tube Calculator using IN-12 Nixie Tubes.
DIY Electronics
Backers: 13
Average Pledge Per Backer: $257

Funded: $3,338 of $20,000
Dates: Nov 4th -> Jan 2nd (60 days)
Project By: scott baker
Tags:
Aw shucks, no tags yet. +Suggest

Suggest Tags

Begin typing to search or pick from a list. You can add multiple tags at the same time!
SubmitCancel

What is tagging? || Have a new tag we should add?
Saving your suggestions...
Suggestion Saved Successfully
Thank you for your help! The Kicktraq gnomes will get to work on your suggestions very soon.

Please keep in mind not all suggestions may be used, and repeated re-submissions may result in being rejected automatically (and we don't want that to happen).

If you have any questions, have a good idea for a tag, or a more in-depth suggestion - please feel free to let us know!

Ok
Hrm... something went wrong.
Hey, bad things happen to the best of us. Don't worry, the gnomes have been dispatched. Maybe try again in a little while.

Ok

$3,338

current pledge level
Last Updated: January 2 @ 12:30 -0500 GMT

16%

of goal
funding period ended

$0

trending toward
Trends are not projections. Read More >>

0%

of goal

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

Now you can share!

Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.

Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.

HTML for websites & blogs
Copy HTML

BBCode for forums
Copy BBCode

Reddit code for... well, Reddit
Copy Reddit Code

Special Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.

You can read more about it here.
Latest News

The new case revision has arrived

November 22nd - via: kickstarter.com
The prototype new case arrived from the laser cutter. It came in a big flat sheet: laser cut acrylic sheet Astute observers may notice a 10-tube cutout in the above sheet in addition to the 8-tube cutout that is included in the kit. I'm considering... (Read More)

New case revision under way

November 11th - via: kickstarter.com
I spent some time over the weekend updating the design for the case to fill in the gaps. Assuming everything turns out as planned, the new case should pretty much completely encompass the guts of the calculator (full side, back, top, and front... (Read More)

If you have additional news that doesn't appear here, shoot us a link!