Active 3D Printing Projects
(found 6 projects)
Ends Today
Gusev Crater, The Landing Site Of NASA's Rover “Spirit”
A Sleek Replica Of The Gusev Crater Landing Site Which Started The Exploration Of NASA Rover Spirit
Current
188%
Backers: 4
Funding: $94 of $50 (188% funded)
Average daily pledges: $5
Campaign Dates: March 5th -> March 25th (2019)
Time left: 0 days, 1 hours, 31 minutes
Funding: $94 of $50 (188% funded)
Average daily pledges: $5
Campaign Dates: March 5th -> March 25th (2019)
Time left: 0 days, 1 hours, 31 minutes
Ends Tomorrow
The Stinger II, Auto Bed Leveling Print Head for 3D Printers
Integrated Print Head system for upgrading 3D Printers. Hot End Holder, Fans, Fang Cooling Ducts, Auto Bed Leveling Sensor and Firmware
Current
91%
Backers: 32
Funding: $4,564 of $5,000 (91% funded)
Average daily pledges: $143
Campaign Dates: February 21st -> March 26th (2019)
Time left: 1 days, 11 hours, 50 minutes
Funding: $4,564 of $5,000 (91% funded)
Average daily pledges: $143
Campaign Dates: February 21st -> March 26th (2019)
Time left: 1 days, 11 hours, 50 minutes
Ends Thursday
500mm3 real surface 3D printer and CNC machine All In One!!
500mm3 real surface 3D printer and CNC machine. All In One!! Impresora 3D y CNC Todo en Uno de 500mm cubicos reales de superficie!!
Current
125%
Backers: 3
Funding: €1,751 of €1,399 (125% funded)
Average daily pledges: €146
Campaign Dates: March 13th -> March 27th (2019)
Time left: 2 days, 3 hours, 39 minutes
Funding: €1,751 of €1,399 (125% funded)
Average daily pledges: €146
Campaign Dates: March 13th -> March 27th (2019)
Time left: 2 days, 3 hours, 39 minutes
PEI coated flex-plate system for 3D printers
PEI coated spring steel sheet and magnet system for 3D printers
Current
48%
Backers: 129
Funding: $14,686 of $30,000 (48% funded)
Average daily pledges: $525
Campaign Dates: February 25th -> March 27th (2019)
Time left: 2 days, 9 hours, 9 minutes
Funding: $14,686 of $30,000 (48% funded)
Average daily pledges: $525
Campaign Dates: February 25th -> March 27th (2019)
Time left: 2 days, 9 hours, 9 minutes
Ends after Thursday
The EndCap: A 3D Printer Accessory
A device that not only helps safeguard your 3D Printer's hot-end but also lets you know if/when your printer has failed.
Current
8%
Backers: 21
Funding: $807 of $10,000 (8% funded)
Average daily pledges: $16
Campaign Dates: February 4th -> March 31st (2019)
Time left: 6 days, 5 hours, 5 minutes
Funding: $807 of $10,000 (8% funded)
Average daily pledges: $16
Campaign Dates: February 4th -> March 31st (2019)
Time left: 6 days, 5 hours, 5 minutes
Ends more than three weeks from now
NEFILATEK : A 100 % recycled 3D printing filament
Filaments coming from recycled sources, offering good performances and easy to print .
Current
60%
Backers: 43
Funding: $3,008 of $5,000 (60% funded)
Average daily pledges: $602
Campaign Dates: March 20th -> April 22nd (2019)
Time left: 27 days, 21 hours, 41 minutes
Funding: $3,008 of $5,000 (60% funded)
Average daily pledges: $602
Campaign Dates: March 20th -> April 22nd (2019)
Time left: 27 days, 21 hours, 41 minutes
< Previous 1 Next >
(total 6 results)