NoClean Aquariums™ - Self-Cleaning Betta Fish Tank!
A project in Chicago, IL by Craig Wenger & David Turover000days
:
00hours
:
00minutes
Funding Successful
Self-Cleaning, Eco-Friendly & Blazing Fast! Simply pour in water and it cleans itself! No electricity, filters, hassles or headaches!
Backers: 556
Average Pledge Per Backer: $95
Funded: $53,015 of $3,500
Dates: Dec 27th -> Dec 31st (15336 days)
Project By: Craig Wenger & David Turover
Backers: 556
Average Pledge Per Backer: $95
Funded: $53,015 of $3,500
Dates: Dec 27th -> Dec 31st (15336 days)
Project By: Craig Wenger & David Turover
$53,015
current pledge level
Last Updated: May 28 @ 16:44 -0400 GMT
1514%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
Quick Important Shipping Note: 
October 26th - via: kickstarter.com
If you have not received your aquarium or tracking number yet there is a chance it is already on route so please be on the lookout! There has been a delay in us receiving the tracking numbers, however we will be all caught up in getting them... (Read More)
Shipping + Aquarium Heater Info and Decorations
October 24th - via: kickstarter.com
Hey Backers- While many have received aquariums by now we are expecting to finalize shipping this week. We have been scrambling the last couple of days to organize and distribute all the tracking numbers to the proper people in good time, however,... (Read More)
Lined up and ready to go!
October 12th - via: kickstarter.com
Hey everyone- We are back with some great news! Today our warehouse sent us the picture below that filled our faces with gladness. Our new custom boxes boxes arrived at the warehouse today and survived a two story test fall onto a concrete floor.... (Read More)
Shipping Update
October 5th - via: kickstarter.com
Just when we thought we were in the clear Murphy's Law strikes again. Our custom boxes were not manufactured to specification and are not properly fitting your aquariums. This was a total shocker since the prototype boxes we approved (pictured in... (Read More)
Shipping!
September 30th - via: kickstarter.com
Hey everyone- The time has finally come that we've all been waiting for! That's right, we begin shipping your aquariums this week! Tomorrow morning we are meeting our warehouse to drop off all the pre-wrapped components that you will find... (Read More)
Production Update
September 5th - via: kickstarter.com
Great news! The sample reservoirs arrived today and they fit perfectly! As you can see from the pictures below, each large plastic sheet has been formed to comprise 16 reservoirs. The die acts like a super-sharp cookie cutter to "punch" out the... (Read More)
Production Update
August 28th - via: kickstarter.com
Hey Backers! We spoke with our die cutter today and have confirmation that our die will be completed on Friday. We’ll immediately get a sample of the die cut reservoir overnighted to us for inspection. This sample should arrive Monday. If needed,... (Read More)
Production Update
July 29th - via: kickstarter.com
Hey Backers! We have had an intense past three weeks. Here’s what's happening. We had our factory ship us another batch of reservoirs. To speed things up we shipped them Next Day Air only to have the package lost by the carrier. After they... (Read More)
Production Update
June 28th - via: kickstarter.com
Hello to all our Kickstarter Backers, the factory that’s producing the reservoirs had a huge job to run for another customer so progress and updates from the factory has been slow over the past two weeks. The wait has been agonizing but thankfully... (Read More)
Production Update
June 10th - via: kickstarter.com
Success! The last round of reservoirs came in this week and fit perfectly! We trimmed the height down a couple millimeters and used an even thinner, more flexible plastic that literally conforms to the aquarium walls and corners so it fits like a... (Read More)
If you have additional news that doesn't appear here, shoot us a link!