3D Refiner by 3Dprintsexpress.com
A project in Berkeley, CA by Ross Yeager000days
:
00hours
:
00minutes
Funding Successful
Using the 3D Refiner you'll transform any 3D Print into a high quality beautifully finished part in a fraction of the time!
Backers: 155
Average Pledge Per Backer: $210
Funded: $32,554 of $5,000
Dates: Apr 1st -> May 1st (30 days)
Project By: Ross Yeager
Backers: 155
Average Pledge Per Backer: $210
Funded: $32,554 of $5,000
Dates: Apr 1st -> May 1st (30 days)
Project By: Ross Yeager
$32,554
current pledge level
Last Updated: May 1 @ 20:01 -0400 GMT
651%
of goal
![](/images/loader-horiz-large.gif)
(loading your very own snazzy kicktraq chart)
![](/projects/1809448130/3d-refiner-by-3dprintsexpresscom/dailychart.png)
![](/images/loader-horiz-large.gif)
(loading your very own snazzy kicktraq chart)
![](/images/loader-horiz-large.gif)
(loading your very own snazzy kicktraq chart)
![](/images/loader-horiz-large.gif)
(loading your very own snazzy kicktraq chart)
![](/images/loader-horiz-large.gif)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
Changed the Stretch Goals, 8 days left!
April 21st - via: kickstarter.com
8 days left to go! We decided to update the remaining stretch goals: @ $35,000 we will add a seal-able lid that can be used during operation and storage. @ $40,000 we will add a high-speed fan to help speed up the drying of the refined part. @... (Read More)
Stretch Goals & New Rewards
April 14th - via: kickstarter.com
With 17 days still left to go, we are happy to announce new rewards: @ $149 you will receive all the electronic and hardware components, BUT no assembly components (you can 3D print these), for a DIY kit of the 3D Refiner, comes with step-by-step... (Read More)
Demo Video (Showing Upgraded Pressure System)
April 13th - via: kickstarter.com
Hey Kickstarter!Thanks again for all your support. For your convenience, we have attached a demo video for the 3D Refiner below. Please watch and share! For having passed the $25,000 mark we have upgraded the pressure system on the 3D Refiner to... (Read More)
Iris Box & Upgrade to Pressure system
April 10th - via: kickstarter.com
Take a look at our video update, featuring the 2 Iris Boxes (one refined, one not) suggested by Backer: Jordan Hackney, find it here. We are going to be upgrading the pressure system as suggested by backers and from our Y-Axis magazine interview,... (Read More)
Take a quick peek. New HD photo. More on the way.
April 4th - via: kickstarter.com
Dear Backers, Working on the operational video and finishing refining the last of the parts before the HD photos are completed. We are trying very hard to get this media out to you ASAP, but in the meantime...Just wanted to give you a heads up, take... (Read More)
Basic Instructional Video
April 3rd - via: kickstarter.com
Hi Everyone, Here is a quick instructional video with basic use of the machine. This video ONLY includes user interface instructions and not the whole process (since we couldn't do the photo shoot with the full tank, solution, etc. as the owner of... (Read More)
Update!
April 1st - via: kickstarter.com
Hi everyone, thanks for all of your support and encouragement! We will be adding more pictures and FAQs in the next two days that will try to address some of your trending questions. As always, feel free to message us with any questions we will get... (Read More)
If you have additional news that doesn't appear here, shoot us a link!