FLEKS3D - THE BEST 3D PRINTING BUILD PLATE
A project in Brooklyn, NY by Viktor Jondal & Peter Ragonetti000days
:
00hours
:
00minutes
Funding Successful
FLEKS3D makes 3D Printing EASIER, with a HIGHER SUCCESS RATE and SMOOTHER WORKFLOW
Backers: 154
Average Pledge Per Backer: $46
Funded: $7,105 of $5,000
Dates: Apr 17th -> May 17th (30 days)
Project By: Viktor Jondal & Peter Ragonetti
Backers: 154
Average Pledge Per Backer: $46
Funded: $7,105 of $5,000
Dates: Apr 17th -> May 17th (30 days)
Project By: Viktor Jondal & Peter Ragonetti
$7,105
current pledge level
Last Updated: May 17 @ 06:02 -0400 GMT
142%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
Less than 24 hours! 
May 16th - via: kickstarter.com
Hello All, We are in the home stretch! Less than 24 hours left. TEAM FLEKS3D (Read More)
We have 3 days left on the campaign!
May 14th - via: kickstarter.com
THANK YOU BACKERS! We are Fully Funded with 3 days left! We could not have done this with out you. Please for the next couple days keep sharing with your friends. We are so excited to get you your plates in JULY! BEST TEAM FLEKS3D (Read More)
Surveys and Extra Plates
May 8th - via: kickstarter.com
Hi All, We have had a few questions about Surveys and Extra Plates. Surveys will go out at the end of the campaign through Backerkit. This will help organize all the surveys and help manage the delivery of your reward. We will ask if you need clips... (Read More)
13 days left and we are soooooo close!
May 3rd - via: kickstarter.com
Hello Backers, 3Dprinters and Makers! Once again thank you for backing FLEKS3D Build Plate. We can not make this possible without you. We are so happy with the results of this campaign so far. We knew it would be a hard go on Crowdfunding another... (Read More)
HALFWAY THERE!
April 24th - via: kickstarter.com
First off, thank you backers, your support is awesome! We are halfway there in funding and closer than ever to bringing you FLEKS3D! Please continue to share and help us promote so we can make it all the way and get these Build Plates made. ... (Read More)
thank you!
April 20th - via: kickstarter.com
Hello Backers, We would like to thank you for your continuing support for FLEKS3D! Over the past 3 years, we have dedicated ourselves to innovating better, more accessible Build-Plates for FDM printing. We have sold over 10k plates world-wide and are... (Read More)
frame thickness and 12x12 inch in Mm.
April 18th - via: kickstarter.com
- Frames are .5 in wide. 1 in in total. This area is not printable and will subtract from the printing area. - The 12 X 12 inches is 304.8x304.8mm. It is a typo in the rewards. We can't update it since rewards can't be updates after someone has... (Read More)
If you have additional news that doesn't appear here, shoot us a link!