ZATSIT, the awesome delta robot and 3Dprinter with hinges !

A project in Sens, France by Marc Peltier
000days 
:
00hours 
:
00minutes 

Funding Successful

ZATSIT is a kit to build a delta robot and 3D printer, innovative in its technology, architecture, construction and performance.
Backers: 174
Average Pledge Per Backer: €247

Funded: €43,033 of €40,000
Dates: Oct 6th -> Nov 5th (31 days)
Project By: Marc Peltier
Tags:
3d printing +Suggest

Suggest Tags

Begin typing to search or pick from a list. You can add multiple tags at the same time!
SubmitCancel
Saving your suggestions...
Suggestion Saved Successfully
Thank you for your help! The Kicktraq gnomes will get to work on your suggestions very soon.

Please keep in mind not all suggestions may be used, and repeated re-submissions may result in being rejected automatically (and we don't want that to happen).

If you have any questions, have a good idea for a tag, or a more in-depth suggestion - please feel free to let us know!

Ok
Hrm... something went wrong.
Hey, bad things happen to the best of us. Don't worry, the gnomes have been dispatched. Maybe try again in a little while.

Ok

€43,033

current pledge level
Last Updated: November 5 @ 14:01 -0500 GMT

107%

of goal
funding period ended

€0

trending toward
Trends are not projections. Read More >>

0%

of goal

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

Now you can share!

Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.

Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.

HTML for websites & blogs
Copy HTML

BBCode for forums
Copy BBCode

Reddit code for... well, Reddit
Copy Reddit Code

Special Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.

You can read more about it here.
Latest News

Hooray! Founded!

November 3rd - via: kickstarter.com
This is my first Kickstarter campaign, so this is the first time I have felt this emotion. And believe me, it's worth living it!   Thank you all! You were wonderful! Your support has been really friendly, and committed. I felt it, through your... (Read More)

A final touch

November 3rd - via: kickstarter.com
While we are only a few hundred Euros away from the founding, I am happy to be able to announce a new advantage: All Zatsit kits, and all mounted Zatsit, will be delivered with black HPL base plates, colored in the mass, and aluminium profiles with a... (Read More)

A limited edition of Zatsit and Tri-Zatsit, assembled and ready to operate.

October 30th - via: kickstarter.com
Dear Backers,   We all want the campaign to be funded. As I want to have done everything possible, I decided to offer a limited edition reward level corresponding to fifteen Zatsit, and two Tri-Zatsit, mounted and tested by me.   I think some of... (Read More)

How to make Zatsit work for not one dime (or almost)

October 29th - via: kickstarter.com
I have a particular affection for those of my backers who will want to run Zatsit with very little additional expense, because they illustrate the universality of Zatsit's mechanics, and the relevance of the proposal in mechanics kit only. Zatsit is... (Read More)

How to reduce the expense to equip Zatsit to 220€, without losing anything in performance?

October 29th - via: kickstarter.com
The optimal price/quality configuration, in my opinion, is identical to the top configuration already described, with only two changes:   Duet Maestro controller replaces Duet WiFi  For use on Zatsit, with Duet Maestro, you will lose absolutely... (Read More)

How to equip Zatsit with a top configuration, at less than 300€?

October 29th - via: kickstarter.com
Electronics Here, no hesitation! Duet WiFi is the best, especially with a 20% discount! This controller can be purchased online here. Power supply   We need a PS of at least 360W, in 24V, in other words, 24V, 15A or more. Here is a proven model,... (Read More)

How to complete Zatsit? My general advice

October 29th - via: kickstarter.com
I will try to describe, in a series of "Updates" that will follow, three typical configurations that are well balanced, in my opinion, and distributed from the most efficient to the cheapest.  This description is now made easier, as the best... (Read More)

Great news! Duet3D wanted to help Zatsit!

October 27th - via: kickstarter.com
Dear backers, I am pleased to announce that any backer of a complete Zatsit kit, as part of this Kickstarter campaign, will be able to benefit from a coupon for a 20% discount when purchasing one of the following controller cards: Duet WiFi, the... (Read More)

Some Zatsit's Tricks

October 24th - via: kickstarter.com
Hello friends, dear backers!  In the video I am publishing today below, I show some tips related to the attachment system of the accessories, by three magnets.  One of these tips concerns the creation of a hot chamber, to print certain difficult... (Read More)

Actu n°2 : Distinguished backers, and Tri-Zatsit

October 17th - via: kickstarter.com
Hello everyone, dear Backers! You may not all know it, but you have, among you, personalities who are respected references in the world of 3D printing. People who have been animating this community for years, or who have written reference books on... (Read More)

Near 50%, out of steam?

October 9th - via: kickstarter.com
Dear backers, This has been a very warm start to the campaign, and I thank you all for your encouraging and very positive comments. I have a rather rare feeling when I see that my action is initiating a community around the world, and I find this... (Read More)

If you have additional news that doesn't appear here, shoot us a link!