uStepper
A project in by ON Development IVS000days
:
00hours
:
00minutes
Funding Successful
uStepper incorporates microcontroller, stepper driver and absolute encoder in an ultra-compact design fitting on the back of a stepper!
Backers: 90
Average Pledge Per Backer: kr917 DKK
Funded: kr82,495 DKK of kr60,000 DKK
Dates: Aug 20th -> Sep 19th (30 days)
Project By: ON Development IVS
Backers: 90
Average Pledge Per Backer: kr917 DKK
Funded: kr82,495 DKK of kr60,000 DKK
Dates: Aug 20th -> Sep 19th (30 days)
Project By: ON Development IVS
kr82,495 DKK
current pledge level
Last Updated: September 19 @ 10:30 -0400 GMT
137%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
Entering the last 24 hours of the campaign !
September 18th - via: kickstarter.com
Hi everyone! We are now running on the last 24 hours of the campaign, and we want to thank everybody who have backed this project ! The last few days have been crazy, we have received a lot of new pledges, exceeding our wildest expectations ! We... (Read More)
Funded!!
September 15th - via: kickstarter.com
Hi again ! As you may have noticed, we have just reached our goal a couple of hours ago! (Yaay! :) ) We are very thrilled and happy about this accomplishment, and we are grateful for your support! Best Regards, Thomas and Mogens (Read More)
Preparing for test
September 14th - via: kickstarter.com
Hi there! As mentioned in our previous update, we are so eager to get started with the final uStepper PCB that we are already preparing initial tests. We have made a small PCB for testing of the switch mode regulator just this afternoon. Switch mode... (Read More)
Still working on it...
September 10th - via: kickstarter.com
Hi everybody! Even tough both Thomas and me has just started at the masters programme in Control and Automation at Aalborg University last week, we are still working on uStepper. We have been working on easing the mounting of the uStepper. More... (Read More)
Only 12 days to go!
September 7th - via: kickstarter.com
Hi everybody. Now there's only 12 days left of the campaign and we are climbing slowly but steady towards our goal! Last week we were invited to a local hackerspace Hal9k here in Aalborg, to tell a little about the process from idea to start of our... (Read More)
Almost half way there
September 1st - via: kickstarter.com
After some slow days were almost half way to our goal now. We are still actively trying to spread the word using our network. But we also need you to spread the word about uStepper for this campaign to succeed! In the meantime we are visiting a local... (Read More)
On the Atmel blog - again!
August 29th - via: kickstarter.com
A little update on the past few days. We are happy to see that Atmel did a larger post about uStepper on their blog yesterday! You can se the post... (Read More)
uStepper featured on Atmel blog!
August 26th - via: kickstarter.com
We are happy to see that Atmel picked uStepper as one of the 21 smartest and most innovative crowdfunding projects of last week! You can see the blog post here:... (Read More)
Robort arm demo video
August 25th - via: kickstarter.com
As promised a couple of days ago, we have now made a small video showing the robot arm in action! A little more description to the video can be found in the campaign text along with the video itself. For convenience the video is also added here in... (Read More)
Almost 1/3 of the way!
August 23rd - via: kickstarter.com
Today we reached almost 1/3 of our goal! We are grateful for the support, and hope that you will spread the word so we will reach our goal! Today we have added some more technical details to the campaign description, as a response to some of the... (Read More)
Robot arm application example
August 21st - via: kickstarter.com
As you might have seen in the campaign description, we have made a quick mock-up of a robot arm as an example application for uStepper. The quick robot arm mock-up - A beauty posing for the cameras! The components for the arm are designed by us,... (Read More)
24h update
August 20th - via: kickstarter.com
We've got a good start, with 1/6 of our goal reached within the first 24 hours! We are exited to see how long it will take for us to reach our goal and maybe even go beyond that! We are gratefull for those already backing the project and look forward... (Read More)
If you have additional news that doesn't appear here, shoot us a link!