The Few and Cursed: Shadow Nation

Tag: "instrument"

(found 107 projects)

Ends after Thursday

Tiny Time Tool - A Stylish EDC Accessory for Watch Lovers!

A portable/wearable micro-tool for bracelet tightening, resizing, or strap changes on the move - also great for glasses/sunglasses!
Current

62%

Backers: 114
Funding: $5,590 of $9,000 (62% funded)
Average daily pledges: $311
Campaign Dates: November 28th -> December 19th (2019)
Time left: 2 days, 21 hours, 49 minutes

Ends a week from now

Proportioner Reboot - Golden Ratio Calipers

A new instrument empowering you to discover the golden ratio around you & harmonize your creations with this beautiful proportion.
Current

402%

Backers: 122
Funding: $6,512 of $1,618 (402% funded)
Average daily pledges: $283
Campaign Dates: November 23rd -> December 25th (2019)
Time left: 8 days, 17 hours, 50 minutes

Ends two weeks from now

𝞅-Ruler

𝞅-Ruler (“phi-Ruler”) is an inch/millimeter brass ruler — construct perpendicular lines, arcs, and the Golden Rectangle.
Current

664%

Backers: 143
Funding: $7,973 of $1,200 (664% funded)
Average daily pledges: $1,595
Campaign Dates: December 11th -> January 1st (2020)
Time left: 15 days, 17 hours, 48 minutes

Ends more than three weeks from now

TONE Factory

a minimalist turntable optimized for your bluetooth speaker
Current

173%

Backers: 293
Funding: €69,395 of €40,000 (173% funded)
Average daily pledges: €11,566
Campaign Dates: December 10th -> January 9th (2020)
Time left: 24 days, 2 hours, 36 minutes

Orba - A musical instrument designed for your hands

A portable synth, looper, and MIDI controller that lets you create songs in seconds.
Current

1018%

Backers: 4458
Funding: $509,187 of $50,000 (1018% funded)
Average daily pledges: $24,247
Campaign Dates: November 25th -> January 13th (2020)
Time left: 27 days, 15 hours, 48 minutes

Closed Projects

The fastest filament extrusion Bot, makes ABS/PLA in color.

The ExtrusionBot is the worlds fastest home built automatic filament extrusion Bot that can make color in ABS and PLA @ up to 4ft / min
Closed

887%

Backers: 225
Funding: $88,745 of $10,000 (887% funded)
Campaign Dates: June 14th -> July 14th (2013)
Closed: Sunday July 14th, 2013

Canyon. FINALLY Recording Her Follow-up EP!

After writing songs and performing for the past 10 years, Canyon. is now FINALLY about to record her first professionally produced EP!
Closed

132%

Backers: 105
Funding: $9,245 of $7,000 (132% funded)
Campaign Dates: July 23rd -> August 20th (2013)
Closed: Tuesday August 20th, 2013

kitar, the evolving instrument

interchangeable necks and built-in effects
Closed

105%

Backers: 75
Funding: $19,024 of $18,000 (105% funded)
Campaign Dates: August 13th -> August 29th (2013)
Closed: Thursday August 29th, 2013

Qube: Don't Get Caught Unaware By Power Outages

Qube is a low cost outage and temperature sensor device, that can provide immediate local alerts and data to help all around the world.
Cancelled

60%

Backers: 316
Funding: $12,001 of $20,000 (60% funded)
Campaign Dates: July 30th -> September 3rd (2013)
Closed: Tuesday September 3rd, 2013

Javier Nero Debut Album: "Introducing Javier Nero"

Exciting, original, mind-blowing Jazz/Soul/Afro-Caribbean instrumental/vocal music!
Cancelled

2%

Backers: 13
Funding: $505 of $20,000 (2% funded)
Campaign Dates: July 11th -> September 9th (2013)
Closed: Monday September 9th, 2013

Red Pitaya: Open instruments for everyone

Technologies yesterday available only to research labs and industry turn your iPhone, tablet or PC into an amazing instrument.
Closed

512%

Backers: 826
Funding: $256,125 of $50,000 (512% funded)
Campaign Dates: July 22nd -> September 20th (2013)
Closed: Friday September 20th, 2013

Velv Adyr EP Project

Help up and coming Instrumental Rock band Velv Adyr release their first Instrumental EP! Hope to get your Support!
Closed

14%

Backers: 5
Funding: $210 of $1,500 (14% funded)
Campaign Dates: August 28th -> September 27th (2013)
Closed: Friday September 27th, 2013

CS X51 USB/MIDI Control Surface

A beautifully designed & built USB/Midi Control Surface for electronic musicians & DJs. 100% programmable & compatible.
Closed

110%

Backers: 303
Funding: £29,801 of £27,000 (110% funded)
Campaign Dates: September 2nd -> October 5th (2013)
Closed: Saturday October 5th, 2013

3D Printed Finger Doumbeks

3D printed plastic drums that can be played with the fingers. Since they're ABS plastic and watertight, you can also drink from them!
Closed

33%

Backers: 44
Funding: $1,680 of $5,000 (33% funded)
Campaign Dates: October 2nd -> November 1st (2013)
Closed: Friday November 1st, 2013

BeatBox Cajon - Drum Kit In A Box

The punchy bass! The snappy snare! Now offering the world's finest acoustic/electric cajon. A "Drum kit in a box".
Closed

2%

Backers: 8
Funding: $1,627 of $60,000 (2% funded)
Campaign Dates: October 3rd -> November 10th (2013)
Closed: Sunday November 10th, 2013

< Previous 1 2 3 4 5 6 7 8 ... Next >

(total 107 results)

Performing maintenance. Some data may be briefly unavailable but is being collected and will be applied shortly.