The Neo-Artist: A High-Tech Guide to Making Art and Products

A project in Los Angeles, CA by Lincoln Kamm
000days 
:
00hours 
:
00minutes 

Funding Successful

A book dedicated to teaching artists and all makers how to start, run, and market their own business using the latest technology.
Backers: 169
Average Pledge Per Backer: $26

Funded: $4,440 of $4,000
Dates: Jun 11th -> Jul 12th (31 days)
Project By: Lincoln Kamm
Tags:
books3d printingartcraft3deducational +Suggest

Suggest Tags

Begin typing to search or pick from a list. You can add multiple tags at the same time!
SubmitCancel
Saving your suggestions...
Suggestion Saved Successfully
Thank you for your help! The Kicktraq gnomes will get to work on your suggestions very soon.

Please keep in mind not all suggestions may be used, and repeated re-submissions may result in being rejected automatically (and we don't want that to happen).

If you have any questions, have a good idea for a tag, or a more in-depth suggestion - please feel free to let us know!

Ok
Hrm... something went wrong.
Hey, bad things happen to the best of us. Don't worry, the gnomes have been dispatched. Maybe try again in a little while.

Ok

$4,440

current pledge level
Last Updated: July 12 @ 16:01 -0400 GMT

111%

of goal
funding period ended

$0

trending toward
Trends are not projections. Read More >>

0%

of goal

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

Now you can share!

Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.

Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.

HTML for websites & blogs
Copy HTML

BBCode for forums
Copy BBCode

Reddit code for... well, Reddit
Copy Reddit Code

Special Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.

You can read more about it here.
Latest News

We did it!

July 12th - via: kickstarter.com
Again, a big thanks to all the backers!  We did it! Thanks to 159 folks (so far) backing the project we've gone over the needed goal for my book by about $200! There's still a few hours to go, it ends st 1pm PST. You can still contribute to get the... (Read More)

The final Countdown - 24

July 11th - via: kickstarter.com
In less than 24 hours this Kickstarter project will come to a close.  A HUGE thanks again to all the backers.  This project is all about helping you build a level of independence based on your creative skills, and without you believing in yourself... (Read More)

Book Project Features Practical Tools for “The Neo-Artist” for Using the Latest Digital Manufaturing Technologies

July 11th - via: adafruit.com
When we recently discovered The Neo-Artist, it seemed like Lincoln Kamm was living the dream. He has developed an expertise in helping creative people find ways to produce and sell their work using the latest in digital manufacturing technologies, and now he wants to share it with you. (Read More)

Interview with 3D-PrinterWorld.com (and only 45 hours left)

July 10th - via: kickstarter.com
Thanks again to all the backers!  We have raised about 80% of the minimum goal and have 45 hours left to raise the last 20%. I know we can do it if each of you let other creative folks know about this project.  The people I've worked with... (Read More)

66 hours to go

July 9th - via: kickstarter.com
With just 66 hours left to raise the minimum for this Kickstarter project, we have raised 68%! Thanks to all the old and new backers for the support.  Please take a few minutes to let other creative folks know about this project, and how the book... (Read More)

Time is running out

July 8th - via: kickstarter.com
Thanks again to all the backers we are past the 60% mark! There is still a ways to go.  We still need about 80 people to pledge at least $20 for the e-book to reach the minimum goal for this project to become a reality.   The long weekend with the... (Read More)

Fund this book on Kickstarter, get early access

July 8th - via: blog.readmill.com
We’re all about supporting independent authors, publishers and retailers, as well as surfacing great books you won’t find anywhere else. We’ve done some great interviews and giveaways with authors that have funded their books through Kickstarter, something we talked about recently. We wanted to go a step further and take part in a book project, and give you early access to it too. (Read More)

More than half way there

July 2nd - via: kickstarter.com
There are 10 days left, and we are more than half way to the minimum goal needed for the Kickstarter to be successful and the book to be completed.   Thanks again to all the backers!  Not only for pledging money, but also for sharing this project... (Read More)

13 days to go

June 28th - via: kickstarter.com
Big thanks to all the backers!  Also thank you for sharing with other creative people about this book and Kickstarter project. There only 13 days left to raise the last 54% of the minimum for this Kickstarter. I have every bit of confidence that we... (Read More)

Helping yourself

June 24th - via: kickstarter.com
Thanks again to all the backers!  We are at 40% and climbing every day.   I've been talking with a lot of creative people that I thought would be interested in this project, and have found that many of them are interested in it, but are out of... (Read More)

There's more to it

June 19th - via: kickstarter.com
Thanks again to all the backers we are still on track to reach the minimum.  But, I can see the infamous "Middle of a Kickstarter Slump" is starting.  So please keep help spreading the word.  Also, we are far away from reaching the amount needed... (Read More)

3 more weeks to go

June 18th - via: kickstarter.com
It is one week from when this Kickstarter went live. That puts us at the 25% mark and we have raised 27% of the goal.  That's great!  There is no way to know if the momentum will continue at the same, better, or slower pace, so please keep helping... (Read More)

25% and growing

June 17th - via: kickstarter.com
Thanks again to all the early backers and to the new ones, we have surpassed the 25% mark, and we still have 3 weeks and a day left to get raise the rest. Please keep letting other creative folks know about the book and this kickstarter project.... (Read More)

28 days to go. Here's a tease of the table of contents

June 14th - via: kickstarter.com
Thanks again to all the original backers, and a brand new thanks to all the new backers since yesterday! We are almost at 20% of the minimum goal which puts us on track to bring in about 150% more than the original goal.  I'll be announcing the... (Read More)

Getting press

June 13th - via: kickstarter.com
It's been just 48 hours since this Kickstarter launched, and we are already at 15% of the minimum goal.  Thanks so much to all you wonderful backers!  Please keep spreading the word as we have a long way to go and I have some very cool surprise... (Read More)

The Neo-Artist: a high-tech guide to making

June 13th - via: blog.ponoko.com
Lincoln Kamm spent 12 years in the animation industry before breaking out and producing his own works. He has since met with notable success with six-figure sales and is now helping others learn how they too can do the same. In an upcoming publication The Neo-Artist, Lincoln expands on his college lecture series and consulting experience. (Read More)

The first 24

June 12th - via: kickstarter.com
It's been just 24 hours since this Kickstarter launched and I want to thank all of you that have pledged and shared it with friends.  We are on track to slightly meet more than the minimum needed to be successful, but Kickstarters tend to slow down... (Read More)

Kamm Launches Kickstarter Campaign to Help Artists Monetize Their Inspirations

June 12th - via: 3dprinter-world.com
Lincoln Kamm left a successful career in the animation and computer graphics industry to start creating and selling his own art. Now he’s on a mission to teach other people how to monetize their own creative inspirations using 3D printers, laser cutters and other tools. (Read More)

If you have additional news that doesn't appear here, shoot us a link!