Balkenheim - 100 printable medieval houses (STL files)

A project in Norden, Germany by DasTri
000days 
:
00hours 
:
00minutes 

Funding Successful

100+ different medieval style half timbered (Fachwerk) houses in 1:100 and in print-optimized versions for 6mm and 3mm gaming.
Backers: 44
Average Pledge Per Backer: €27

Funded: €1,194 of €1,000
Dates: Oct 20th -> Nov 17th (28 days)
Project By: DasTri
Tags:
Aw shucks, no tags yet. +Suggest

Suggest Tags

Begin typing to search or pick from a list. You can add multiple tags at the same time!
SubmitCancel
Saving your suggestions...
Suggestion Saved Successfully
Thank you for your help! The Kicktraq gnomes will get to work on your suggestions very soon.

Please keep in mind not all suggestions may be used, and repeated re-submissions may result in being rejected automatically (and we don't want that to happen).

If you have any questions, have a good idea for a tag, or a more in-depth suggestion - please feel free to let us know!

Ok
Hrm... something went wrong.
Hey, bad things happen to the best of us. Don't worry, the gnomes have been dispatched. Maybe try again in a little while.

Ok

€1,194

current pledge level
Last Updated: November 17 @ 06:07 -0500 GMT

119%

of goal
funding period ended

€0

trending toward
Trends are not projections. Read More >>

0%

of goal

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

(loading your very own snazzy kicktraq chart)

Now you can share!

Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.

Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.

HTML for websites & blogs
Copy HTML

BBCode for forums
Copy BBCode

Reddit code for... well, Reddit
Copy Reddit Code

Special Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.

You can read more about it here.
Latest News

Something completely different...

November 16th - via: kickstarter.com
Well, I should not post such an update on the last day, but while printing a building (that from the 1:56-update) in all available scales, I stumbled about the "ironing" on Cura and had to test this. Usually we do print with standard settings to get... (Read More)

We made it!

November 16th - via: kickstarter.com
Success! For a week or two we doubted this would happen, but thanks to all of you Balkenheim will have its topping out soon. So what will happen now... 1. We will start finish the promised 125 buildings - 5 are actually open now, as we have added 25... (Read More)

Close

November 14th - via: kickstarter.com
Pretty close - just in case we do not succeed here is the plan: Unlike many campaigns this was not a naked sale, so many of the now 125 buildings are not yet made - this means we cannot just offer you the same set in our own shop (which we do not... (Read More)

Steps forward... ?

November 12th - via: kickstarter.com
While we do have some slow and slugging progress in this campaign, it is not enough to rejoice and celebrate. Chances are that we will not make it.  This time... However, before you get some musings about how to progress from here, wether with or... (Read More)

Images of painted 6mm (and some 3mm)

November 7th - via: kickstarter.com
Well, all quite on this campaign.  As demand for changes in the design are low, I will give you some more of the painted stuff. These are painted and printed for my town project. If you want something more specific, let us know.  This was our small... (Read More)

Packed Earth?

October 31st - via: kickstarter.com
Hello Backers! Three questions: In medieval times the typical floor covering was packed earth. While our upper floors have floorboards to offer some variety, the ground floor looks, alas bland: When printed, it looks like we have simply forgotten to... (Read More)

English style incoming...

October 27th - via: kickstarter.com
I got a nice drawing of a Tudor building, and decided to give it a go.  Here you will see a first draft of the English style, which is characterized by narrow studs without much bracing. I simply adapted a 6*8 house with different skin, which yields... (Read More)

Walls & Towers for the small scales...

October 26th - via: kickstarter.com
We got a couple of requests to make the walls and towers available that were shown in our 3mm Balkenheim. These were originally prototypes for a (surpris) wall & tower project, and they do not have any structured surfacess. Due to other factors... (Read More)

If you have additional news that doesn't appear here, shoot us a link!