Hexy the Hexapod - Low-Cost Six-Legged Open Robot
A project in Boston, MA by ArcBotics000days
:
00hours
:
00minutes
Funding Successful
$168,267
current pledge level
Last Updated: June 28 @ 00:01 -0400 GMT
1294%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
These are the crowdfunded robots you didn't know you needed.
February 19th - via: redbull.com
The rise of the robots is well underway. But where are you putting your money? We take a closer look at some of the best crowdfunded robots walking the line between awesome and absurd, and the creators fueling this robo revolution. (Read More)
Kickstarter Complete!
April 18th - via: kickstarter.com
Dear Backers, We've finished shipping out the last handful of kits! It's been an incredible journey and a wonderful learning experience. Thank you so much for all of your support along the way. We really appreciate your patience and the incredible... (Read More)
A Kickstarter Year in Review: Boston’s Best, Coolest & Weirdest Kickstarter Campaigns of 2012
December 19th - via: bostinno.com
Since its inception on April 28, 2009, Kickstarter–the powerhouse funding platform for creative projects of all stripes–has, by its own account, seen over $350 million pledged by more than 2.5 million people, funding a total of more than 30,000 creative projects. In 2012 by my tally, 378 Boston-area Kickstarter projects have reached their target funding goals. Quite likely more still have joined the ranks since my count. That’s the beauty of Kickstarter–boundless opportunity, openly decided upon by your peers. (Read More)
Shipping Progress and Clarifications
December 5th - via: kickstarter.com
Shipping progress We've shipped all controller boards, all early backers and 156 additional Hexys so far. Huzzah! Production Schedule We're producing around 150 kits a week right now with our cutters going full bore. At the rate we're going, we... (Read More)
Electronics arrived, Units shipping!
November 11th - via: kickstarter.com
Hey everyone! We've got great news. The electronics have finally arrived from China! We're assembling the custom units, and shipping these and the early backer units in full on Monday. Huzzah! The other units will follow as we're able to cut them.... (Read More)
Shipping starting next week!
November 2nd - via: kickstarter.com
The first boards have shipped from China as of yesterday, and should be arriving next week! Short and customs issues or board defects, with those, we can start the mass shipments to kickstarter folks. Looking forward to getting out all those kits!... (Read More)
Laser Cutter Fire/Manufacturing Update
October 16th - via: kickstarter.com
Fire! Last week we our laser cutter caught on fire in the middle of cutting a Hexy kit. It was pretty bad: Er... what happened?The best we can guess is that someone at the hackerspace Artisans Asylum where we were operating the laser cutter shut off... (Read More)
Manufacturing and Delivery Dates
September 17th - via: kickstarter.com
Hey everyone! A lot's been happening, and we figured we'd give you an update as to what's going on with manufacturing, and when you guys can expect your rewards. So, we got the servos: And the feet: And lots of bagged screws: Lots of ultrasonics,... (Read More)
Hexy Colors!
August 10th - via: kickstarter.com
Sorry for the long wait on colors, It took much longer than expected to get all the colors of plastics. We were mislead by the local plastics supplier on lead times, and orders that previously took two days have taken 4 weeks. We have since found a... (Read More)
Post-Kickstarter, Metal vs Plastic Gears.
July 17th - via: kickstarter.com
Hello everyone! We've been incredibly busy getting ready to produce the hundreds of Hexys ordered. Here's some of the stuff that's been keeping us busy: Reward Surveys and Color Choices We've collected the information for people who are ordering... (Read More)
Maker Faire, Press and Cheap Robots for Everyone!
May 30th - via: kickstarter.com
Wow, its been a fantastic past two weeks. The kickstarter exploded, funded in one day. We're meeting tons of people interested in helping the educational mission, and opportunities are popping up as fast as we can reply to them. Press is also... (Read More)
If you have additional news that doesn't appear here, shoot us a link!