FLX.ARM: Low-Cost Precision Robotic Arm
A project in Biddeford, ME by Flux Integration LLC000days
:
00hours
:
00minutes
Funding Successful
Low-cost precision robotic arm for 3D printing, light-duty milling, and electronics assembly.
Backers: 96
Average Pledge Per Backer: $864
Funded: $82,905 of $50,000
Dates: Sep 16th -> Oct 7th (21 days)
Project By: Flux Integration LLC
Backers: 96
Average Pledge Per Backer: $864
Funded: $82,905 of $50,000
Dates: Sep 16th -> Oct 7th (21 days)
Project By: Flux Integration LLC
Tags:
+Suggest$82,905
current pledge level
Last Updated: October 7 @ 13:04 -0400 GMT
165%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
FLX.IDE Electronics Pick and Place for FLX.ARM.S16.Z8
October 7th - via: kickstarter.com
There are only 5 hours left, but we want to make sure you have a chance to see how to setup an electronics pick and place operation. Please find the video below. You'll need an HTML5 capable browser to see this content. Play 00:00 00:00 Thank you... (Read More)
3D Printing Example
October 3rd - via: kickstarter.com
We had requests for example prints of well-known models. Please find an example below. We have been experimenting with different cooling options. We aren't 100% satisfied, but we are getting there. You'll need an HTML5 capable browser to see... (Read More)
FLX.IDE CAD and CAM Demonstration for FLX.ARM.S16.Z8
October 1st - via: kickstarter.com
Many of you wanted to see how to use CAD and CAM in FLX.IDE. Please find the video below. You'll need an HTML5 capable browser to see this content. Play 00:00 00:00 Our next video demonstration will show how to setup an electronics pick and place... (Read More)
Stretch Goal - $100,000
September 30th - via: kickstarter.com
We want to provide some incentive to get the FLX.ARM out to as many users as we can, so here is the stretch goal. If we reach $100,000 we will include an auxiliary port in the control box, in addition to the toolhead port. This port can be used to... (Read More)
We Reached Our Goal!
September 30th - via: kickstarter.com
Thank you backers! It's official, we have reached our goal with a week to go! We are extraordinarily grateful to all of our backers. We are working hard on our video demonstrations. We will have the milling demonstration up tomorrow and then we... (Read More)
FLX.IDE 3D Print Demonstration for FLX.ARM.S16.Z8
September 23rd - via: kickstarter.com
We are over 70% of the way to our goal. Thank you backers! Many of you wanted to see how to setup a 3D print in FLX.IDE. Please find the video below. You'll need an HTML5 capable browser to see this content. Play 00:00 00:00 Our next video... (Read More)
Over 30%!
September 19th - via: kickstarter.com
We are over 30% of the way to our funding goal. Thank you backers for your support! Early next week we will start releasing video demonstrations on how to use FLX.IDE to perform specific operations with FLX.ARM. Please let us know if there is a... (Read More)
International Backers
September 18th - via: kickstarter.com
We have updated the second pre-production reward. International backers can now get the pre-production FLX.ARM.S16.Z8 for $1,999. Thank you again for your support! Best, Josh (Read More)
First Day
September 17th - via: kickstarter.com
We want to thank our backers for supporting us! Please do not hesitate to contact us with any questions or comments you may have. If you would like to see a video demonstration of a particular feature or operation please let us know. Thanks again,... (Read More)
FLX.ARM 3D Printing Robotic Arm, Launches on Kickstarter to Raise $50K
September 17th - via: 3dprint.com
While Flux Integration LLC, a software and hardware developing company, has received an initial grant from The Maine Technology Institute, it’s hard to believe their robotic arm, FLX.ARM, hasn’t caught the eye of a big investor yet. FLX.ARM is a precision robotic arm designed for 3D printing, light-duty milling, and electronics assembly. (Read More)
If you have additional news that doesn't appear here, shoot us a link!