3D Printing 1.75, 2.85 & 3 mm Filament Holder & Storage Case
A project in Arlington, VA by John Lehman000days
:
00hours
:
00minutes
Funding Successful
Filament (1.75, 2.85 & 3 mm) spool holder & storage case system for 3D printing with 360 degrees of freedom!
Backers: 13
Average Pledge Per Backer: $102
Funded: $1,322 of $1,000
Dates: Jun 21st -> Aug 18th (58 days)
Project By: John Lehman
Backers: 13
Average Pledge Per Backer: $102
Funded: $1,322 of $1,000
Dates: Jun 21st -> Aug 18th (58 days)
Project By: John Lehman
$1,322
current pledge level
Last Updated: August 18 @ 18:14 -0400 GMT
132%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
Need your help! 
August 13th - via: kickstarter.com
We need your help to spread the word, as we are a couple cases short of making our funding goal and I think August is a tough time to have a project going on the internet, as we are all so busy, however I want to finish building and shipping the... (Read More)
Tested 52 cases and no issues!
August 6th - via: kickstarter.com
Testing the tabs! Attached is a photo of how we tested the tabs of the latest cases, to ensure the manufacturer has resolved the issue with the tabs cracking. Every case we ship will be thoroughly tested to ensure we do not ship one that a tab... (Read More)
Is humidity causing your filament to be unusable?!
July 12th - via: kickstarter.com
So I initially wanted to add a dehydrator that would clip onto the cases and dry the filament, thus allowing one to be able to print with what is normally unusable filament. However after having time to really use the filament cases and with the... (Read More)
Ordered the hardware required for 100 cases!
July 10th - via: kickstarter.com
Thanks to all again for early backing, as I just went through my inventory and ordered everything I need for 100 cases, as I want to ship these as soon as the funds are released! Spread the word, as the more we can produce and put into use, the more... (Read More)
New Design Feature
July 6th - via: kickstarter.com
As I finally get a chance to do my own 3D printing, I get to use the filament cases and add the features I always wanted to when I initially designed it to be adaptable to almost any standard filament spool. Pictures shows a simple wing nut, that... (Read More)
Shout out!
June 25th - via: kickstarter.com
A quick shout out to say thanks to a few whose names look familiar, as it tells me they were happy with the last Kickstarter they helped me with. Plus we also have more international backers and will get to ship one to Germany, adding more global... (Read More)
Confident!
June 23rd - via: kickstarter.com
From the initial two days, we are confident enough to start ordering all the hardware to ensure we can start shipping the day after funding is approved. We began purchasing the items we need and didn't have left over when we first successfully... (Read More)
Off to a good start!
June 22nd - via: kickstarter.com
Thanks for those who backed my project the first day, as it puts us off to a good start and we can start ordering all the required items to ensure we ship immediately after the funding process is completed. The jigs we need will help with keeping... (Read More)
If you have additional news that doesn't appear here, shoot us a link!