The Micro M3D Compatible Heated Print Bed
A project in by Chase Wichert000days
:
00hours
:
00minutes
Funding Successful
The 3rd party heated print bed for The Micro M3D printer brings full utilization to the printer.
Backers: 247
Average Pledge Per Backer: $106
Funded: $26,214 of $16,000
Dates: Jul 20th -> Aug 19th (30 days)
Project By: Chase Wichert
Backers: 247
Average Pledge Per Backer: $106
Funded: $26,214 of $16,000
Dates: Jul 20th -> Aug 19th (30 days)
Project By: Chase Wichert
$26,214
current pledge level
Last Updated: August 19 @ 11:01 -0400 GMT
163%
of goal
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
(loading your very own snazzy kicktraq chart)
Now you can share!
Help your backers reach your daily goals and help others see how you're doing. It's easy, with Kicktraq Mini.Here are a few quick snippits of code you can use to embed your personalized widget on your website, in your blog, and even on your favorite forum.
HTML for websites & blogs
Copy HTMLBBCode for forums
Copy BBCodeReddit code for... well, Reddit
Copy Reddit CodeSpecial Note: Kickstarter recently disabled remote embedding for images on project pages, so embedding code doesn't work on project pages (yet) - just everywhere else.
You can read more about it here.
Latest News
20K!! Stretch Goal #2 Done! 
August 16th - via: kickstarter.com
Stretch Goal #3 Heat barriers! These are aluminum barriers with a garolite backing that help to insulate the the micro from the heated bed, this also reduces power consumption, and from my preliminary testing, might allow you to also use the internal... (Read More)
Injection Molding - Almost There!
August 14th - via: kickstarter.com
Just getting ready for some injection molding! 3 Days to go, I think we will make the 20K! (Read More)
Stretch Goal 1 Complete!
August 13th - via: kickstarter.com
We made it to the first stretch goal. If you don't upgrade to PEI, your bed will now come with Kapton tape applied! This will allow you get up and running, without having to wait on Kapton or something else to arrive. I do recommend the PEI sheet;... (Read More)
Thank you!
August 11th - via: kickstarter.com
I just wanted to say thank you to everyone for pledging and getting us to our goal! You are awesome! Now the hard(er) work begins! (Read More)
Final Week Suprise Addon And Price Reduction!
August 10th - via: kickstarter.com
Check out the main page for more information!Just add the total amount of addons to your current pledge amount. (Read More)
78% And Rising!!
August 8th - via: kickstarter.com
I can't thank you guys enough! You are all awesome! We have 10 days and $3,414 left! I think we can do it. The video below is a minion. But had some layer adhesion issues near the top with M3D software, probably would work better with Cura at this... (Read More)
Enclosure Design Reveal!
August 4th - via: kickstarter.com
I have finished the design of the enclosure. Take a look! It features four hinged polycarbonate doors with magnetic latches. The mounts are spring loaded with rubber feet that won't damage your Micro, and are easy to install and remove! (Read More)
1 Power Cord to Run Them All!
August 3rd - via: kickstarter.com
I have successfully tested the step down converter from 12vdc to 5vdc. It works well. I have plans to add another connector to the PCB and create a new cord that will go from the enclosure to the Micro. The converter is rated higher amperage than the... (Read More)
Halfway there!
July 29th - via: kickstarter.com
The enclosure design will be done soon, and the testing of the integrated power cord will also be done soon. Don't forget about the addons! (Read More)
3DBenchy Test Print - ABS
July 27th - via: kickstarter.com
I had a request to print 3DBenchy. It stuck extremely well to the PEI on the heated bed. Take a look. You'll need an HTML5 capable browser to see this content. Play Unmute Play with sound 00:00 00:00 (Read More)
Hey Everyone!
July 27th - via: kickstarter.com
We are making good progress!!! I just ordered some components to test out the integrated power cable. Looks like it should work without any problems, and would be a very nice add on. Also I should have the enclosure design done in a few days, I'll... (Read More)
Installing mounts and bed
July 23rd - via: kickstarter.com
You'll need an HTML5 capable browser to see this content. Play Unmute Play with sound 00:00 00:00 (Read More)
PEI Sheet Update
July 21st - via: kickstarter.com
I just tried out the PEI Sheet, so far I like it! The discoloration at the end I was able to wipe off, so I think it might be residue left from the adhesive cover that was on it. Take a look! You'll need an HTML5 capable browser to see this content.... (Read More)
Change to Stretch Goals and Add-Ons
July 21st - via: kickstarter.com
Hey guys, I decided to make a change to the stretch goals. I kept the Kapton Film Installation Goal and the Injection Molded Mounts goal. I moved the PEI Sheet, Acrylic Enclosure of the four sides, and a modified power cable to run both the heated... (Read More)
Software
July 21st - via: kickstarter.com
Just wanted to show you a screen shot of the simple program to power the board. I am working on getting the temperature/resistance table nailed down, which is why the temperature is reading so ridiculously high. (Read More)
My Damaged Micro
July 21st - via: kickstarter.com
Hey, I just received a question about if the bed will damage the printer. In some of the images my printer looks damaged, and it is, HOWEVER, it isn't because of the board, I got acetone on the printer in an earlier experiment and since it is made of... (Read More)
You are awesome!
July 20th - via: kickstarter.com
This post is for backers only. Please visit Kickstarter.com and log in to read. (Read More)
If you have additional news that doesn't appear here, shoot us a link!